All Things Old....

I've been in contact with my bowhunting buddy, and he mentioned that he hunts winter rabbits with a .22 caliber air rifle--with great success. I've been thinking that might be a good option to scratch my hunting itch since sitting in a tree stand with my bow is time consuming and I never really know what my schedule will look like come deer season. Rabbit hunting is faster paced and a lot less gear-intensive.

In any case, I went looking for a pneumatic air rifle to replace my Gamo Shadow 1000 piston rifle. Piston rifles are the cheapest way to get huge velocity. The trade off is that they're rough to shoot, loud, and the piston vibration eats scopes alive. My Shadow has even beaten its own iron sights to death. The trigger sucks too. Pneumatic rifles typically have no recoil impulse, and decent triggers. The highest order of pneumatics are "pre-charged pneumatics" or "PCP" rifles. They're about as expensive as a good .22LR, but you can shoot one in your basement with only a basic pellet trap. And pneumatics are typically very quiet, so you could take several rabbits or squirrels in one area without raising much alarm. Being pre-charged, the PCP can be fired several times between getting pumped up with a manual pump or with a bottle of compressed air. This makes it function more like a firearm, and pretty appealing to me.

Here's a video of a modern PCP from Benjamin (I'm very interested in this particular model):



While 22LR stocks are increasing online, and trickling into stores, supplies of airgun ammunition never really went away. Even top-shelf brands are not particularly expensive. I ordered 2000 rounds of various match pistol pellets from MidwayUSA for about $30 shipped. Sometimes the big box gun stores around me even have interesting varieties of ammunition.

Ammunition perks aside, the higher-end airguns can hunt small game, and are terrific for punching paper. The best part is that I can take my airguns to my friends' and family's homes in the country and shoot (even teach the kiddos to shoot!) without alarming nearby livestock, and without a large berm or backstop. While you still need a backstop or trap of some kind, making or finding one out in the wild isn't very hard. Airguns are worth looking at as an addition to your training tools, and there's one out there for every budget.

While we're on the subject of airguns, and specifically PCP rifles, below is a fascinating video that is worth eight minutes of your time. The PCP concept has been around since shortly before the Lewis and Clark expedition. All things old are new again, it would seem

Back To Basics

It's the height of winter here in Iowa. That means daytime highs below zero, snow, screaming winds, and cabin fever. Cabin fever inevitably leads me to new-gun-fever. There's a gun show this weekend, and payday was Friday. Luckily, James talked me down from buying a Beretta CX4 with a 92 series mag well. I still got a new gun though.

Using my logical brain parts, I decided on a Crosman 1377C. This air pistol has been in production since the dawn of time, and for good reason. It's durable, accurate, simple, and very affordable. In fact, it's such an all-arounder that it can be bought with a bolt-on rifle stock. And the rear sight can be converted from notch to aperture. I've only had this machine for about a day, but I already love it, and I've got big plans for it in the future.

We've been in the deep freeze for about a month now, and I've been thinking of getting a CO2 powered M&P clone. Reviews were hit and miss regarding reliability, and having too much farmer in me to waste $50, I let it go. However, I couldn't really find anything negative about the old stalwart 1377C.  And when the fever struck today, I had no choice.

I built my own pellet trap, which is SUPER overkill even for my Gamo Shadow 1000 piston-powered rifle. And as luck would have it, my basement is about 40 feet long, so I made a 10 meter range. And airguns at 10 meters is pretty serious business for some folks. For the rest of us, it's just good practice. Bullseye shooting has sort of gone by the wayside, but it's a discipline that can only help your action shooting or defensive shooting. And even though it's "just an airgun", the fundamentals still apply. You're never too old or too good to practice your fundamentals.

There's a video circulating of the Glock ladies shooting silhouettes at 200 yards with their G34s. Assuming it's an IPSC metric, that's 17" wide and 29" high (roughly). Shooting a 1" dot at 10 meters is about the same apparent size (roughly 8 MOA). So assuming you can hit the 1" dot at 10 meters, you're almost as good as Glock's 19-year-old yoga pants model.

FOUR DAYS LATER...

So onward to the gun. The Crosman 1377C has been in production since 1977, and remains largely unchanged. The reason is that this gun is very good, and very ruggedly built. There's some barn-door engineering, and it's certainly built to a price point. However, the good by far outweighs the...quirky.

The Bad:
Upon doing some research, I found that the 1377 and it's big brother, the 1322 (which is a .22 caliber clone) often suffer from excessive elevation and sometimes canted front sights. In fact, the sights aren't all that good. The front blade is crudely cast plastic, and mine is canted. And had excessive elevation. The rear sight is crudely adjustable with a set screw that you loosen, make your adjustment, and re-tighten. This is not optimal, but damn if it doesn't work. Also, the trigger, out of the box, is a bit heavy. Ok, it's quite heavy. But it is fairly short, and quite crisp.

Remove that screw and you can flip the rear sight leaf over and make it an aperture, ideally for use with the bolt-on shoulder stock kit ($25 online). Cool idea executed very simply.

The Good:

All of the quirks are easily fixed for free or for pennies. Once those quirks are fixed, this thing is capable of really excellent accuracy. It doesn't seem to have any preference for ammunition types (.177 pellets come in all shapes and weights) and isn't terribly sensitive to how many times you pump the gun. Six to ten pumps gets the exact same point of impact at 10 meters on my indoor range. I tend to use five to six pumps because it's much quieter and less work.

Five shots at ten meters. This is my best group so far.

Get Your MacGuyver On:

I need a pen cap, some super glue, sand paper, and sharp scissors.

I cut the pen cap stem to fit, then glued it on (and let it set for 15 minutes) and sanded the top and sides flat to give me a sharper sight picture. It's an easy fix, and works really well. That target took twenty rounds from ten meters, and I only screwed up the trigger pull twice.

Next, I'll need a small flat screwdriver.

The grip panels are each held in place with a single screw. That spring is the only trigger spring, and it's easily modified. Remove it by compressing it slightly. I did this with my fingers without too much cursing. Once out, lay it on a piece of white paper, and make a mark at each end. Now use your fingers to compress the spring down and make it take a set shorter than it used to be. I smashed mine about 3/16" and the trigger is really nice now.

By The Numbers:

The Crosman 1377C is a variable pump pneumatic pistol, operating on three to ten pumps (if you go over 10, you don't get higher velocity, you just trash your seals.). The advertised max speed is 600fps, which is really not bad. I've seen chrono videos of the 1322 where it actually meets or exceeds its listed maximum velocity. I have no reason to believe the 1377 won't do the same, especially if you shoot newfangled lightweight pellets. The pistol is 13.5" long (which is also the sight radius), weighs 1.875lbs, and MSRP is $79.99. However, I got mine at the local Sportsman's Warehouse on sale for $64 out the door, and similar deals are available online.

So What?

If you live somewhere you can shoot in your back yard or indoors without a visit from the local SWAT team, you NEED to own this gun. It's a fantastic training tool that is extremely affordable to purchase and to shoot. It's about as simple and rugged of a design as you'll ever see, and with minimal maintenance it should last the better part of a lifetime. Dry fire is all well and good, but this pistol allows you to put rounds downrange and see the results of your work.

I mentioned earlier that there is a rifle stock that bolts into the pistol grip. This is available for about $25 online. So for a total of $89, you can have a very good pistol that is also a very good rifle. And you can convert the sights over to aperture and squeeze even more accuracy out of it. The only question is "can you afford NOT to own one?".

Good shooting, I'm off to purchase more pellets. Lots more.

Save Big Green

Remington has been circling the drain for several years now. They ruined the ACR, then bungled the release of their R51 which was about six years late to the single-stack-9mm party anyway. I couldn't understand what Big Green was thinking, but it all became clear when a friend shared a link on my Facetube page. Yep, Remington is absorbing Para into it's own lineup. I think this is a good first step.

In my opinion, the reason Remington has been in trouble is that it refused to change with the times. Contrast this with Ruger, who has completely changed their lineup in the last couple years--even listening to consumers and making significant changes to existing products in a relatively short time (like the LC9 becoming the LC9s, and the revised LCP). Remington has lived off the 870 and 700 since time began. This was enough because until the early 2000s, the biggest group of firearms consumers were hunters and clay busters. Then, suddenly, self-defense and competition exploded in popularity. And Remington kept making the same two guns for a consumer who bought their 870 and 700 back in 1970 and shoots them twice a year. With the exception of the Versamax, Remington has been making the same guns since 1950.

Then Remington acquired Bushmaster, as well as the rights to the Magpul Masada which would become the Bushmaster ACR. Remington then, shall we say "economized" the ACR into a lame piston AR that costs more than a piston AR from a better manufacturer. As Magpul designed it, the Masada was totally modular and could even be changed to accept AK magazines through the use of a modular lower receiver. Throw in the badly bungled R51, and as of last year, Big Green was on borrowed time. To add insult to injury, Remington started a web series starring some blonde girl who is painful to watch. And all she does is go hunting, which is also painful to watch.

Then I hear that Para is being absorbed into the Remington lineup. This may be the first sign that someone on the board of directors may have heard about USPSA/IPSC or 3-Gun Nation---and they may want to sell some guns. So bravo, Remington. Here's your roadmap to success from here on out.

Next, absorb Bushmaster and become the next BCM. Increase the quality of all your components and focus on selling AR15 parts. Hardly anyone buys a complete AR15 anymore. They're too easy to build, and you can build a high quality one for the same money or less than a WalMart Bushmaster carbine. Sell uppers, lowers, and milspec M16 bolts built with NO MIM or cast parts. Fix the ACR and make it the rifle Magpul promised us.

While you're streamlining, FIX YOUR FINISHES! I have a friend with an R1 and after less than a year, the bluing is largely gone. I had the same problem with my Para LTC. Put a quality finish on, or sub it out to Cerakote. Put more attention on doublestack .40 and 9mm 1911s with an eye to USPSA/IPSC Limited class. Price them to compete with CZ's excellent Tac Sport--around $1200. Make them reliable, nicely finished, and maybe even throw in a full-length dust cover for weight. Undercut STI and get some market share.

Cancel the trainwreck web series you have and find some up-and-coming USPSA and 3-Gun Nation stars. Sponsor a winning team with ACR rifles, Remington doublestack 1911s, and Versamax shotguns.

Let that system go to work for a while. Make some capital. Then develop a plastic doublestack line, again with an eye to competition and defense. You could probably get away with making a Glock 19 sized one for carry, then a 5" barreled model for competition.

I hope Remington can pull this off, but I have a feeling that accountants and lawyers wishing to play it "safe" will ruin everything and they'll go bankrupt anyway.